1996 Z272 rear corner seat removal.
 

Has anyone removed the rear corner seat assemblies from a 1996 Z272? I have not found any exposed mounting hardware and thought it prudent to to ask before peeling back carpet and prying around.

What are you attempting to do? Does something need repair?

How about the back of the seats? Is it fiberglassed or molded into the side panels? I'd check there first, before peeling up the carpet.

Hopefully we'll have one of the former Mariah employees answer this question for you. Mike Miller, one of our members was heavily involved in the design of the boats from 92-96. You might try sending him a private message. If you don't hear anything right away, some of our members might be able to help. Just be patient, and don't tear up your boat until you get a solid answer! :wink_thumbup:

I want to reupholster the backrests and install new carpet.

The seat assemblies appear to be of wood construction and are not molded into the sides.

Appreciate your help.

Re: 1996 Z272 rear corner seat removal.
 

Corner Seat Removal

Re: 1996 Z272 rear corner seat removal.
 

Corner Seat Removal

Hello, I'm pretty sure there are screws up through the bottom of the seat that secure it down.

hope this helps.