The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Original Mariah Talk (http://www.mariahownersclub.com/forum/original-mariah-talk/)
-   -   Engine cover/ layout deck (http://www.mariahownersclub.com/forum/original-mariah-talk/10445-engine-cover-layout-deck.html)

croush 08-20-2015 07:51 PM
Engine cover/ layout deck
 
OK guys help me out. I had a snafu today leaving the lake and my hatch blew. Didnt notice until I got home. I was in a hurry to pick up the daughter from school. Its 1995 210 talari, if and one knows the size so I can rebuil . On a good note my head rest were off getting recovered so I still have those. Thanks all in advance.

jsewall82 08-22-2015 08:41 PM
Engine cover/ layout deck
 
3 Attachment(s)
I just built mine by measuring the hinge location to the back seat. Make sure to measure both sides. My Z210 was not square. Once I had that piece cut I measured from the bottom of that to the top of the seat and built it accordingly. I used foam and marine vinyl from Joann fabric (coupons online). Not the best way but better than nothing.

Paul F 08-24-2015 08:35 PM
Re: Engine cover/ layout deck
 
Wow, mine has a full length piano hinge. Did the hinge pull out of the fiberglass or the pad?

croush 08-24-2015 08:56 PM
Re: Engine cover/ layout deck
 
Came out of the fiberglass. It was a bad day overall lost that on the way home. While on the water blew out the engine coupler. So all in all was a pretty bad day.


All times are GMT. The time now is 10:44 AM.