[higginslakejoe]

I am looking for where I can buy a wheel bearing kit? Any leads are much appreciated.

[Motoxxx43]

There really is not a whole lot too special to trailer hubs. If you were to take the ones you have to a place like NAPA, Autozone, etc you should be able to find what you are looking for. I have even purchased a bearing kit from Walmart in the boating/RV section. They are that common.

HERE is a link to eTrailer. They have a ton of parts. That link takes you to the #3500 axle bearing which Im assuming you have. If you pull your bearings you should be able to get a number off of them.

BTW... Welcome to MOC.

[higginslakejoe]

Thanks! Had my Mariah since 99. Love it!

[impact1839]

I have a 1997 Jubilee and chariot trailer. Just replaced all the bearings and one was non standard.
UFP provided the actuators, axles, and bearings for these trailers for some time. Go to their website and look up the catalog UFP - Axles

The 1997 Chariot has the following:
L68149 outer bearing
L68110 outer race
L44649 inner bearing
L44610 inner race (Hard to find in sets)
Seal 2.33 outer diameter and 1.68 inner diameter (Hard to find)

Bearings & Races
The (OEM) manufacturer makes the bearing and risers in a kit for a steal and at 1/3 of buying individually. You can purchase at very attractive pricing the kit from california trailer works https://caltrailerworks.com/online/p...&cat=13&page=1
Many places sell sets but all the sets will have everything you need but the correct size inner race and seal if offered. THe L44611 inner race will be offered instead of the L44610. The former is used on utility trailers wheras the latter is used for marine trailers, Nevertheless you will still come off cheaper by buying the set and purchasing the inner race and seal separately.

Hopefully you either have the foresight to purchase before you need these items but like many we get it when we need it and we pay dearly for needing it now. Think ahead and order them now you will save 2/3 by doing so which is significant. I paid $45 for the five items separately and later purchased the set mentioned above + separately purchased the inner race and seal for$32. I then ordered from California trailers $19 set+ shipping. May be cheaper to buy the set + riser and seal locally if you have that option unless you want OEM or you are ordering at least two sets.

Seal
The seal is here https://caltrailerworks.com/online/p...cat=150&page=1 and it is 2.33 OD which is hard to find.


Mariah used a good company for trailer parts and we have them all available to us via the link above. Actuators and all their parts, hubs, drums, bearings, seals, axles, brake assembly and parts all from the place they got them from to start with which is nice to know.

I had a tuff time in this process but now I got it down. Hope the info helps

[higginslakejoe]

Originally Posted by impact1839

I have a 1997 Jubilee and chariot trailer. Just replaced all the bearings and one was non standard.
UFP provided the actuators, axles, and bearings for these trailers for some time. Go to their website and look up the catalog UFP - Axles

The 1997 Chariot has the following:
L68149 outer bearing
L68110 outer race
L44649 inner bearing
L44610 inner race (Hard to find in sets)
Seal 2.33 outer diameter and 1.68 inner diameter (Hard to find)

Bearings & Races
The (OEM) manufacturer makes the bearing and risers in a kit for a steal and at 1/3 of buying individually. You can purchase at very attractive pricing the kit from california trailer works https://caltrailerworks.com/online/p...&cat=13&page=1
Many places sell sets but all the sets will have everything you need but the correct size inner race and seal if offered. THe L44611 inner race will be offered instead of the L44610. The former is used on utility trailers wheras the latter is used for marine trailers, Nevertheless you will still come off cheaper by buying the set and purchasing the inner race and seal separately.

Hopefully you either have the foresight to purchase before you need these items but like many we get it when we need it and we pay dearly for needing it now. Think ahead and order them now you will save 2/3 by doing so which is significant. I paid $45 for the five items separately and later purchased the set mentioned above + separately purchased the inner race and seal for$32. I then ordered from California trailers $19 set+ shipping. May be cheaper to buy the set + riser and seal locally if you have that option unless you want OEM or you are ordering at least two sets.

Seal
The seal is here https://caltrailerworks.com/online/p...cat=150&page=1 and it is 2.33 OD which is hard to find.


Mariah used a good company for trailer parts and we have them all available to us via the link above. Actuators and all their parts, hubs, drums, bearings, seals, axles, brake assembly and parts all from the place they got them from to start with which is nice to know.

I had a tuff time in this process but now I got it down. Hope the info helps

Thank you! I have had great difficulty finding the inner seal.

Joe

[birddognva]

Seal available here:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
(Pack of 2) WPS Trailer Hub Wheel Grease Seal 168233TB 1.688'' x 2.332'' Double Lip #84 Spindle

Bearing Kit here:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Dutton-Lainson 21866 6508 Trailer Wheel Bearing Set
Includes 2 bearings with races, 1 grease seal and cotter pin
1-3/8 x 1-1/16 inch spindle O.D.
1.98 outer hub I.D.
Cone nbr L44649/L68149
Cup nbr L44610/L68110