Mariah SX Dash instrument panel
 

Hi,
Looking for a replacement gauge binnacle for my SX21. It doesn't have to be perfect as I'm getting it recovered in a carbon fibre wrap. No cracks would be helpful as mine is in bits already from when I replaced the fuel gauge. Brittle plastic cracked. Any help is appreciated.

I think the same panel size was used on the earlier Z222?


https://imgur.com/a/BkAKMew

Re: Mariah SX Dash instrument panel
 

This may be difficult since all of them are getting old and brittle. Any way to epoxy yours back into a suitable form to wrap?

I saw you posted on the facebook page too, which will get much more attention than here so hopefully someone can help out.

Re: Mariah SX Dash instrument panel
 

Hey Greg, thanks for the response. Yea, he's going to try epoxy it. The only issue is it's going to crack again/more if I need to get at an instrument at some point. Wonder if I can apply a few layers of epoxy to the rear of it to give it some stability.

Have a metal fabricator coming to look at it on Monday. He says he could fabricate a new one but the problem he sees is the anchors for the instrument brackets. Once he looks at it he might be able to work in a solution.

Let you know!

Re: Mariah SX Dash instrument panel
 

Adding a layer of epoxy to the back could be a workable idea, just look for areas that might interfere if it gets too thick. I would think if you can get it stable with epoxy then adding a wrap on top would also add some strength. Interested to see how it works.