The Mariah Owners Club

The Mariah Owners Club (http://www.mariahownersclub.com/forum/)
-   Mariah Parts For Sale & Wanted (http://www.mariahownersclub.com/forum/mariah-parts-sale-wanted/)
-   -   Wanted: 1993 Shabah 212z (http://www.mariahownersclub.com/forum/mariah-parts-sale-wanted/1177-1993-shabah-212z.html)

ToddQ 05-26-2008 05:10 PM

1993 Shabah 212z
 
Hi all. I'm new to the club but but have owned my Mariah for the last 8 years and have had nearly zero trouble with the boat. I do need a couple parts of anyone has them or can tell me the best place to get them I would appreciate it.

1. the rear slim vent cover - 17-1/2" x 2-1/2 inches both sides.

2. The drivers side hull light plastic housing - no light needed I believe it's part number QL-31. (Long story on how that broke)

3. Passenger Side window support in chrome.

Thanks to all.

Todd

WetWilly 05-26-2008 10:34 PM


Hi Todd and welcone to the Club!

May I suggest you post yourself on the introduction’s forum so the other member can get to know you? Tell us about you Mariah again and where you like to boat and a little about yourself if you like!

We have a Member Map, so take some time to stick your pin on it. Here's a tutorial on adding your pin: [URL="http://www.mariahownersclub.com/forum/showthread.php?t=913"][U]Click here

We also have a growing library of manuals, brochures, wiring diagrams, and all sorts of information relevant to your Mariah, the stern drives and equipment. All of these are available to our contributing members. Click here to see what each level has to offer.

As for you parts:

1) The vent covers were discussed in an earlier thread. A search on the forum produced this result: Click here, then look at post #2 and click on the link there and it should show you what your looking for or a close replacement.

2) Your docking lights were made by Barnegat light Marine products, QL-31 is the model number. I would try contacting them for replacement parts, here is a link to their dealers: Click here

3) I assume you're referring to the brace from the passenger dash to the windshield frame. If this is correct, this was an in-house item made of stainless steel, not chrome and unfortunately, no longer available. You may want to try a metal fabricator shop, they should be able to manufacture a replacement.

Good luck and if you need any help getting around the Forum, just PM me,
WetWilly


All times are GMT. The time now is 09:52 PM.